revo1059 Posted August 29, 2013 Report Share Posted August 29, 2013 Installed new booster. Edge stop much better now, however the pedal does not contact the brake switch anymore, it's "short" by 3/4 inch or so. Pedal is pinned to the booster properly, not sure how to adjust anything. Any ideas? Quote Link to comment Share on other sites More sharing options...
Cam416 Posted December 16, 2013 Report Share Posted December 16, 2013 On the back of the booster should be an adjustable rod. Just match the thread length of the old booster with the new one Quote Link to comment Share on other sites More sharing options...
Feirstein Posted January 7, 2014 Report Share Posted January 7, 2014 The shop manual has detailed instructions on how to setup the switch before one performs the replacement to make sure it is not bent out of position. Did you read those instructions first? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.