Leagigi Posted July 28, 2013 Report Share Posted July 28, 2013 Hi all... It seems that the turn signal only blinks for 3 seconds unless I hold it up or down... Is there no setting to extend the indicator blink? Thanks for your help :D Quote Link to comment Share on other sites More sharing options...
Jackman5000 Posted July 28, 2013 Report Share Posted July 28, 2013 Keep pushing/pulling the turn signal lever. Your only hitting the first part which is lane change signal. A little more push/pull and it will stay in position until you turn like normal. Quote Link to comment Share on other sites More sharing options...
Leagigi Posted July 28, 2013 Author Report Share Posted July 28, 2013 Ahhhh... I will try that ... Thank you Jackman :D Quote Link to comment Share on other sites More sharing options...
Jackman5000 Posted July 28, 2013 Report Share Posted July 28, 2013 Yup. Kinda annoying at first but you'll get used to it Quote Link to comment Share on other sites More sharing options...
rsto Posted July 31, 2013 Report Share Posted July 31, 2013 Took me a little bit to figure this out when test driving mine, used to an 03 frontier that had the indicator lever stick in place up or down until I turned, had my edge for 2 and a half weeks and still trying to get used to this one always going back to the neutral position after I use it. Quote Link to comment Share on other sites More sharing options...
KingMike Posted August 20, 2013 Report Share Posted August 20, 2013 Moved to correct section. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.