Jump to content

How To's - Powertrain, Electronics, Body, & More!


Recommended Posts

Does your 2011-14 need the backup camera replaced? Here's a HowTo (thanks, ugoleftillgorite!):

http://www.fordedgeforum.com/topic/19747-backup-camera-replacement/

 

Also, thanks to xK317Hx:

http://www.fordedgeforum.com/topic/17508-reverse-cam-woes/page-2?do=findComment&comment=129556

 

and a calibration tip (NOTE: This may require a Windows machine) from wlepse:

http://www.fordedgeforum.com/topic/20314-idsscan-tool/?do=findComment&comment=151231

 

and NWS Alpine:

http://www.fordedgeforum.com/topic/6241-2011-edgemkx-my-touch-and-sync-problems/page-17?do=findComment&comment=155100

Edited by WWWPerfA_ZN0W
  • Like 1
Link to comment
Share on other sites

  • 1 month later...

macbwt has traveled long and far with his Edge(s), and has had many opportunities to DIY repairs along the way. You can tag along and watch the videos he has made, available directly at his YouTube channel here:

https://www.youtube.com/channel/UCJb7karK2nhyA7G1BW6xESg/videos

 

Don't forget the commentary! You can read it here:

http://www.fordedgeforum.com/topic/18170-double-edged/

 

How to find his content on this forum:

http://www.fordedgeforum.com/index.php?app=core&module=search&do=user_activity&search_app=forums&mid=28743&sid=9c4957ff017cbd74afa9faab45cdf00b&search_app_filters[forums][searchInKey]=&userMode=title

 

time to add his FB and MeWe pages:

https://www.facebook.com/groups/MACTFORDEDGE/

https://www.facebook.com/groups/122296998313817

 

https://mewe.com/group/5fbc030eedc4177fe93d6585

https://mewe.com/join/mactgarage

 

and of course his website:

https://www.mactgarage.com/

Edited by WWWPerfA_ZN0W
  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

Looking to replace the TSS/OSS sensors on your 2007-10 Edge/MKX? Zazzy has posted about his experience:

http://www.fordedgeforum.com/topic/19167-tss-oss-sensor-change-pcu/?do=findComment&comment=149332

 

Additional pics of the area by thirdgenlxi:

http://www.fordedgeforum.com/topic/13407-what-have-you-done-towith-your-edgemkx-today/page-13?do=findComment&comment=124435

 

Video on MACT FORD EDGE on YT:

https://www.youtube.com/watch?v=K-aqwVkVSvM

 

Wondering how to replace the heater core/evaporator on your 2007-10 Edge/MKX?  Zazzy is center stage once again:

https://www.fordedgeforum.com/topic/17238-no-heat-decided-to-fix-it/

Edited by WWWPerfA_ZN0W
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...
  • 4 months later...
  • 1 month later...
  • 2 weeks later...
  • 4 months later...

i would like to adjust the rear wipper arm to park in the horzintal i cannot see how to remove the plastic covers on the arm for 2016 edge

If it's still the same as the older models, you life up on the rear-most section and swing it up. (I popped mine off for easier access, spread edges and pull off).

Remove the 5/8" nut and pull wiper arm off shaft. Then reset in new position.

 

Note I was unable to remove my arm when I changed it on mine last month, had to cut the back of the arm off and use a wheel puller as it froze solid to the shaft. Take care you don't put excess pressure on glass.

  • Like 2
Link to comment
Share on other sites

  • 4 weeks later...
  • 2 months later...

Looking at ABS error codes? Caused by a cracked tone ring? Normally an axle replacement is required because the tone rings are not available separately. HOWEVER, one member has come up with an ingenious solution to fix the tone ring, and here's how (thanks, suprasteve!):

 

http://www.fordedgeforum.com/topic/22452-abs-tone-ring-repair-fault-code-c0226c0222/

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Hey guys I am going to attempt to vinyl wrap the chrome on the grille of my edge this weekend. Any tips ? also has anyone seen how to take the front grille off of a 2013 edge? i haven't really seen any videos. Thanks

 

Did you end up wrapping your grille? If so, how did it come out?

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 3 months later...

Want to move the paddle shifting function from the steering wheel to the shifter handle on your Gen 2 Edge? tmarsh shows how it can be done here

http://www.fordedgeforum.com/topic/23453-shifter-handle/

 

Post 31

http://www.fordedgeforum.com/topic/23453-shifter-handle/page-2?do=findComment&comment=178055

Post 38

http://www.fordedgeforum.com/topic/23453-shifter-handle/page-2?do=findComment&comment=178125

  • Like 1
Link to comment
Share on other sites

  • 5 months later...
  • 4 months later...
  • 2 weeks later...
  • 3 weeks later...
  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...