Cobrakev Posted April 29, 2013 Report Share Posted April 29, 2013 Need nav/radio help. The wifes 2010 Edge nav/radio cuts out, and only certain functions will work. If you shut off the car and restart the car, everything works as normal. It is like you are rebooting the radio. Has anybody else have this happen? Any idea's how to fix, or what to look for? Thanks Quote Link to comment Share on other sites More sharing options...
shoulinpanther Posted April 29, 2013 Report Share Posted April 29, 2013 Is your MFT up to date? Quote Link to comment Share on other sites More sharing options...
thirdgenlxi Posted April 29, 2013 Report Share Posted April 29, 2013 Is your MFT up to date? 2010 doesn't have MFT, it's the Pioneer nav unit Sounds like something internal to the unit itself. Have you run a self test on it to see if there's any codes?? Quote Link to comment Share on other sites More sharing options...
shoulinpanther Posted April 29, 2013 Report Share Posted April 29, 2013 My bad I am still new to the Edge so I wasn't aware that the 10' didn't have MFT. Quote Link to comment Share on other sites More sharing options...
Cobrakev Posted April 30, 2013 Author Report Share Posted April 30, 2013 I did not know the radio could do a self test. I need to find out how to perform this test. Quote Link to comment Share on other sites More sharing options...
thirdgenlxi Posted April 30, 2013 Report Share Posted April 30, 2013 It's super easy...... I went out and snapped a few pics just now While in FM mode, press and hold #3 and 6 presets at the same time for a couple seconds It will first start doing a speaker walk-around test (it will be loud!!). You don't have to do the whole test, you can push the "end test" button right in the middle and it'll skip that, and then you'll be in bezel diagnostics From here you can go to both the on-demand self test, and view DTC's Self test So there it should tell you if there's any codes present. Be sure and do both tests as the on-demand will tell you faults that are happening right now, and the view DTC's will give you stored codes that may have set at another time There's also other cool stuff you can do with these units as well.... and the instrument cluster too. But that's another story, hehe Quote Link to comment Share on other sites More sharing options...
Dingo Posted April 30, 2013 Report Share Posted April 30, 2013 Bce, hold the right skip and the eject button together. Quote Link to comment Share on other sites More sharing options...
shoulinpanther Posted April 30, 2013 Report Share Posted April 30, 2013 I have an eject button. I don't have a right skip. I tried the seek from the steering wheel and the right skip on the screen from replay on Sirius. Both told me I didn't have a disk in the system. I am assuming he means the right skip butting in the circular buttons on center of the stereo consol. Quote Link to comment Share on other sites More sharing options...
Dingo Posted May 1, 2013 Report Share Posted May 1, 2013 I mean seek. On the Sony system, it's on the right side of the volume puck. On the not-Sony system, it's left of the volume knob. Quote Link to comment Share on other sites More sharing options...
shoulinpanther Posted May 2, 2013 Report Share Posted May 2, 2013 (edited) Now if you do this with the tone test will it tell you if you have reverse polarities on after market speakers that are installed? Like home installation tests produce on the newer style receivers. Obviously it would be smart to get the wiring diagram before I would start bit I was just curious. Edited May 2, 2013 by shoulinpanther Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.