ty666666 Posted August 16, 2012 Report Share Posted August 16, 2012 I have a 2008 ford edge, after driving the car for 30 mins 2 days ago, the engine stopped, i put it in park & turned it on with no problems, it was low on gas, so I filled the tank & then after that it did the same thing twice within the next 20 mins but it would immediatly start with no problem. At first I thought it must be dirt from the buttom of the fuel tank getting sucked in to the fuel injection system. but while on my way back home the car stopped & wou;dn't turn back on & when i did a system check, it gave all these errors at the same time "Engine Temp data error", "Oil pressure low"(which is not true), "ODO Data Error", "Tire pressure monitor fault", outside air temp reading was faulty as well(way too high) & i noticed that the immobolizer icon was flashing even when the car was unlocked. The tow truck driver tried disconnecting the battery thinking this might reset the cars computer & make it work, but it didn't & as soon as i reached the ford service center, the car started normally & there were no errors anymmore & the immobolizer wasn't flashing anymore. I left the car to be checked & after 2 days of diagnosis they couldn't find anything wrong, they said all they could see was "LOSS OF COMMUNICATION WITH PCM" so i took the car back & after 2 hours same thing happened again & it won't start. If anyone had this problem before please tell us how how you solved it, because it's turning out to be a guessing game at the dealership. Thanks, TY Quote Link to comment Share on other sites More sharing options...
ls973800 Posted August 17, 2012 Report Share Posted August 17, 2012 The only thought I have is a bad battery if you still have the original. I've driven Fords and GMs that had batteries start to fail and all kinds of weird warning lights, etc came on. Quote Link to comment Share on other sites More sharing options...
akirby Posted August 17, 2012 Report Share Posted August 17, 2012 Sounds like a bad battery or a wiring harness problem where the PCM loses contact with everything (or a bad PCM). I'd start with the battery since that's the easiest one. Another possibility is a bad ground to the vehicle. Quote Link to comment Share on other sites More sharing options...
ty666666 Posted August 21, 2012 Author Report Share Posted August 21, 2012 Thanks for your help guys, I replaced the battery with a new one but the problem is still there, now i Noticed something today, usually when i turn the ignition key halfway, the fuel pump makes a low zzzz sound for a second or 2 which is normal, that means its pumping gas to the engine. But i noticed that whenever this problem happens the fuel pump doesn't kick in or make any sound anymore. Second thing is that the problem shows whenever the car is warm, on a cold start yesterday morning, i left the car turned on for about 45 mins-1:00 hr until it turned off then it took about 35-40 mins of cool down for it to turn back on only for a few mins then turn off, (keep in mind its not overheating) then tonight (It was a colder night) & on a cold start at night, it took 2 hrs 10 mins for it to shut off, so i guess it is affected by temperature. I've also heard that faulty relays might fail under high temperature, so i tried switching relays with others but nothing did the trick, I removed the fuel pump relay & starter relay & switched them with rear defroster relay & AC clutch relay They're both identical & same rating) but nothing solved the problem Tomorrow morning I'm taking the car back to the stealership, hope this time they'd be able to diagnose the problem, Any thoughts/help is very much appreciated as I would share your ideas with the mechanics working on the car. Thanks, TY Quote Link to comment Share on other sites More sharing options...
akirby Posted August 21, 2012 Report Share Posted August 21, 2012 My guess is loose wiring to the PCM and/or a bad ground connection. Check voltage from the battery positive to a chassis ground point. Quote Link to comment Share on other sites More sharing options...
Waldo Posted August 21, 2012 Report Share Posted August 21, 2012 I agree, sounds like something in the wiring or connectors. My bet would be that some water has gotten into the PCM connectors. Quote Link to comment Share on other sites More sharing options...
ty666666 Posted August 26, 2012 Author Report Share Posted August 26, 2012 My guess is loose wiring to the PCM and/or a bad ground connection. Check voltage from the battery positive to a chassis ground point. Thank you guys for your help, problem solved, it turned out to be a corroded wire under the carpet that was occasionally (which explains the intermittent problem) getting in contact with a bare metal of the car & was messing up the ground connection to the pcm, the wire was replaced with a new one & problem solved, drove the car for a little over 100 km with no problems Quote Link to comment Share on other sites More sharing options...
RandyMccall Posted June 26, 2013 Report Share Posted June 26, 2013 do you know where this wire was located at under the carpet ? Quote Link to comment Share on other sites More sharing options...
FredHug Posted December 5, 2014 Report Share Posted December 5, 2014 I have a 2012 Edge, and this on again off again starting problem is driving me crazy and the dealer, who's had it for a week now for the second time and still can't replicate the problem. So he wants me to pick it up again and see if we run into the same problem again. We already replaced battery, the ignition switch, and a relay, each time the on again off again starting problem returned. I would like to know more about that exposed wire under the carpet fixing the problem, which could be what I might need my dealer to do. How did they ever figure that out? I have so far seen three problems like this but no clear fix, other than the posted here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.