livinonthedge

Post pics of the console and HID's

Pledge for electronics keeps dust away and does a good job with a nice light shine if you want that look.

Very nice indeed. As mentioned above, can you provide details on this?

Wanna swap for my black one?

Does the key pad have the actual buttons or is it just a cover for the exsiting key pad?

I agree, that MKX looks like a cross between a Mazda CX9 and a Murano. YUK!

Or chrome Alteeza style tail lights ????

I guess the senior citizens dont have much of a sense of flare. There was one at SEMA that looked really nice with a molded hood scoop. It was small and fit the body lines of the truck. I will dig through my pics and see if I can find it.

Welcome to the forums. Coming from an EVO and an RX8 to an EDGE I can feel your pain when it comes to not having HID's and an import for that matter. If you need a contact on some really nice HID's for a very very low price send me a pm and I will pass you on the info where I got mine. They have the super small ballasts and they worked with no additional harnesses or relays in my 07 Edge. Enjoy the new car its a great deal of fun.

Cant see it on any of my droid phones either. Sad

If you need a spare spoiler to have painted thats in great shape let me know.

Yes. H11

What color is your edge?

I'm pretty new here also, but WELCOME and I hope you enjoy it!

I used flat topped 5mm wide angle LED's. They are clear when off and orange light. I just used a 4mm drill bit to make my two holes, then used a small file to open up the hole just a tiny bit more and the LEDs are nice and snug. Each LED has a resistor or it to knock the voltage down to a safe level for them, 470 ohm I believe. Mine are tied into the rest of the interior lights for now, I actually ran a line from the front dome lights. I am working on a switch that will let me use, both the leds, and the factory lights, just the factory lights, or just the led's when the doors open. We will see how that comes out. For my foot wells I am working on two strips of 20 LED's each. I just ordered some pc board strips in 18" lengths to make it happen. I will keep you posted.

Here are 2 quick pics from the phone since I'm on break from class. Better pictures later. It looks kinda weird in these pics....

I havent had time to do the foot wells and rear seats but my center console cup holders are done. I will take a couple pictures tonight.

$2.25 shipped going once............LMAO

Considering the HELO 834's for the Edge in either a 20 or 22. They have a nice lip on them and they arent too bling for my taste. Thoughts?

100 bux?

Your probably are on the wrong port. The AC has a low side ( the one you should be using) and a high side which is larger specifically for this reason. You do not want to try to service the high side. Look and see if there happens to be an H on the cap that came off the valve you are working on.

As mentioned before the 3D Carbon has an application for the tow hitch, can you post a picture of your kit to see how feasible it would be to cut into it?

True indeed. I got the same impression here too. I'm new also but wanted to take a minute to say WELCOME to the forum and have fun with you car. Let the mods begin.

Thanks man, its still a work in progress, but in the next few months it will come together nicely. The wheels, and katzkins kit and some other goodies will change the appearence considerably. Thanks again for the kind words.