chr8990
-
Posts
12 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Posts posted by chr8990
-
-
@garycrist good information and I completely agree with @lildisco regarding the maintenance schedule for these transmissions. I changed the PTU and RDU fluid as well before 30K.
For reference, here are the instructions that the shop uses when changing the transmission fluid.
2022 Edge ST Transmission Fluid Drain and Refill.pdf 2022 Edge ST Air Cleaner Outlet Pipe.pdf 2022 Edge ST Air Cleaner.pdf
- 2
-
4 minutes ago, 1004ron said:
Please add your location and vehicle Model/Year to your profile signature - Settings - Ford Edge Forum
Done - thank you.
- 2
-
15 hours ago, 1004ron said:
That's actually the tool I've been using to download the ab files so I can compare them, post JSON formatting, in WinMerge. Pretty useful link.
- 1
-
@Wubster100 those changes didn't seem to work. For full context, I am comparing a Canadian 2022 Edge ST 401a to my US 2022 Edge ST 401a.
The changes you notated were some of the differences between the Canadian ST I was looking at and mine. I also tried using the identical values to the Canadian ST in the IPMA and IPC modules (SCCM and HCM were already the same) and the only thing either did successfully was remove the DRL option in the instrument cluster. I ended up reverting back but it's making me wonder if the Canadian Edge even supports the Glare Free option or if that's an EU/UK only thing.
Unfortunately, it seems like getting a VIN in the UK/EU is nearly impossible since it's considered PII.
On 7/7/2024 at 10:09 PM, Wubster100 said:Try these changes and see if it works. I can't find any changes in the HCM. They might be needed too.
IPMA
706-01-02 xx4x xxxx 6x
IPC
720-02-01 xxAx xx5* xx *also try 0 here
720-04-02 4341 xx
SCCM
724-02-01 xxx3 xxxx
- 1
-
On 7/7/2024 at 9:23 PM, Wubster100 said:
Do you have the dual projector headlights? There will be more asbuilt changes than just the IPC.
Yes, I do have the dual projector headlights.
- 1
-
Thanks, @Wubster100. I'll try these tonight or tomorrow and let you know how this works. The HCM module from mine looks identical to the Canadian Edge.
- 1
-
Thanks, @Haz and @sc00by. I did experiment with the IPC module by using the same settings as a Canadian Ford Edge 401a. I did not see the Lighting > Auto Highbeam option change to "Glare Free Highbeam" so figured it wasn't working. It sounds like it still says "Auto Highbeam" in the menus even when Glare Free Lighting is being used though if I'm understanding what the UK Owners Manual says though.
-
42 minutes ago, Wubster100 said:
You need to compare the AsBuilt data from an Edge with and without glare free. The AsBuilt may not be the same as the F-150 because they are different vehicles. In this case, you would need to look at Canadian and EU Edges.
That makes sense. Thank you! Is there anything you're aware of like the spreadsheet below for the F-150? I have not seen anything like this.
-
On 4/24/2024 at 9:46 AM, Wubster100 said:
Glare free highbeams:
You should be able to enable glare free with FORScan as long as you have the dual projector headlights.
Apologies for resurrecting this thread but do you have any idea how to accomplish this with Forscan? I've done this with my F-150 but it appears that the same steps will not work with the Edge.
Auto Headlight Dimming Question
in Edge ST
Posted
I did manage to track down a VIN from a Vignale trim in Italy. Looking at it, there are loads of differences. I'll play around with it a bit more and see if I can get it.