Nick Halstead

no, your only problem will be less focused light than halogen and blinding oncoming traffic

I just think I was expecting a lot more info to help others. like, hey I used to forscan to do this, dealer needed to do this. This guy in Europe is the connect to buy this.

or just buy a nice beautiful steering wheel from SS Tuning out of the Ukraine...they are beautiful

should be able to, the active steering stuff on ford parts site uses same wheel, just has different parts in the column

this post is useless without info to help others.

nice man, can we get a walk through or something?

WOT as I pulled out the lot! warranty ends quick!

though I think every american owner would love you if you could find out how much the fog light trim is

your easiest bet is to get a part# off of the lamp and then see if it compares

I've done this to my fusion, lows and fogs, just used a box cutter and a pair of snips. https://www.hidplanet.com/forums/forum/general-discussion/halogens/1409801-ryan-s-guide-to-halogen-bulbs

It's a crumble zone, only put people you don't like back there if you install a 3rd row

yes all 15+ have drain plugs

My old 2013 SE with the Drivebright DRL, make sure you opt for the other cable too. Allowing them to blink with the door lock, unlock

because the Edge almost looks like 3 other vehicles so they added signature lights to seperate them. thats my opinion

all you guys buying higher wattage, keep an eye on your wiring, just going from a 50watt halogen to a 60w HIR requires a Relay so you don't start a fire...so imagine going even higher...

I have no desire for LED headlights at the present moment

Yeah and we wish we had your manual transmission and foglights

Fun vehicle

remove hose, plug hose. Done. with that said, you will not hear it go off unless you floor it. unlike the fiesta, focus, mustang and most manual turbo cars that go pssshhhh after every gear change, that does not happen on an automatic car like ours. VTA by way of Turbosmart BOV

to clarify a bit more. Factory Halogen setup up low beams act as DRL Factory HID setup DRL has it's own bulb and location as we use a bi-xenon Projector unlike the halogen that is a low beam only projector

There are some on ebay. Fusion uses same wheel also

will post it in FEWW

unless your like me and have had the front bumper off like 999,999. times already... But yes, you must remove the front bumper to take the front emblem off

Too early to tell but, Fusion will eventually be retrofitted anyway so it's not really a long term issue with my setup