PrinzII

Now, I am at 18.5 mpg.

Just liked it.

Cellbine: What's the color temp of those LEDs?

That's the concept.

Not at all. I don't like to leave folks guessing.

Got the Edge back and can tell you there is a great difference.

I did learn from one wheel shop that the bolts for these wheels could be difficult to remove for painting. I would need to verify.

Do the brake lines for the 2010 fit the 2011?

I drove to the dealer today to let them know I heard the sound over the weekend. However, the sound came before I left and I had technicians hear it. They are ordering the brake booster for me. Scheduled for tomorrow.

Is there any sort of TSB for this?

I was looking at Goodridge Phantom Stainless Steel Brake Lines. Anyone got those?

Every now and then I hear a whistle similar to a teapot when I am applying the brakes. I took it to the dealer and they were unable to replicate the issue. I get this at really wierd times like when I am taking the car out of gear or even when I am stopped. I also notice the brake pedal sinking to the floor but the brakes do hold. Anyone experience this?

...or check with Benny from Levittown Ford to get the stock switch cheap.

Just read this and it's reminding me of an issue I am experiencing with my 2011. However, I am still within warranty and will have the dealership handle this once and for all.

I had explored this with my 2008 Edge SE and found that you need the following: New Light Switch Bezels Foglight Housings Foglight Bulbs Then, you have to wire it to the stock electrical system,

....or the replacement of the throttle body as was the case with my 2008 Edge.

Depiry's correct. You definitely need some kind of load resistors to emulate the load for an incandescent bulb.

What KC and I discussed was that the design of the mirror lacks some sort of reflector/diffuser to better spread the light across the mirror versus having mostly output in the center.

I am leaving the stock bulbs in there.....for now.

Yes, it is. Just make sure you choose your shop carefully.

Spoke with kc300c this morning and went over the overall design of the mirror. We are going to explore a couple of options to spread the light around in there.

Also look at 5000K kits.

I am thinking the shape of the bulb may have something to do with it.

I like the ones Edgieguy posted but am wondering what the light output is. Also, I am wondering if they come in amber/yellow.

However, Steeda still has the rear sway bar.