mgmosh

Sorry about the formatting. Let's try this again. Oh and the shipping line shouldn't be there cause my dealer didn't charge me any shipping.

I don't have the full part numbers, but below is what I put together for my Ford dealer. The part number listed is from FordParts.com. If you go to FordParts.com, you can look at the schematics for these items. My Ford Dealer ordered the parts for me and installed them. Labor was $91.00. There is just one front end cap on each side. The rear end caps are built into the rocker panel molding. The rocker panel molding has plastic clips built in. There are 11 of them running the length of the molding. The existing molding will have to be pried out and more than likely you will break the clips, but that doesn't matter as the new rocker panels come with the plastic clips. All you need are the 2 clips for the front end caps. You wouldn't even need to order new screws if you’re okay with using the existing ones. I ordered new, just to be on the safe side. Ford Union Part # Description MSRP Auto 101A04 Rocker Panel 2.0L EcoBoost - Black, RH, Textured Finish 256.40 181.22 101A04 Rocker Panel 2.0L EcoBoost - Black, LH, Textured Finish 256.40 181.22 10176 Rocker Panel Moulding 2.0L EcoBoost - Black, RH, Textured Finish 64.35 45.48 10176 Rocker Panel Moulding 2.0L EcoBoost - Black, LH, Textured Finish 64.35 45.48 HC1 Clip (6 X 20) - (4 Per Pack) 10.04 5.92 HS1 Screw (4.2 x 1.4 x 19) - (4 Per Pack) - Need 2 Packs 13.00 7.60 664.54 466.92

That was my guess too. Like the looks and if it helps with gas mileage, all the better.

The Sport rocker panels are painted and flare out similar to the EcoBoost molding, but I think the shape is slightly different. Although I have only seen a Sport in pictures, so could be wrong. Maybe it is exactly the same as the EcoBoost trim except it's smooth and painted. So you are probably right with what you saw. If you wanted to replace the trim on your Limited with the trim from the Sport, you would pay through the nose, because not only would you have to replace the rocker panels, you would also have to replace the trim just above them. Your bumpers wouldn’t match either as they would still have black on the bottom.

The SEL and Limited have the same molding and its black. The molding is different based on whether the Edge has the V6 engine or the EcoBoost engine. The Sport has a totally different shape and is body colored. The trim is also very expensive. The Sport molding would total somewhere around $2,500. Then you would have the cost of painting on top of that. It come primed only. I was able to get the EcoBoost molding and all the needed accessories for $530. The EcoBoost trim is the back plastic, but instead of wrapping down underneath (3.5L V6 models – SEL & Limited), it flares out at the bottom almost like a mini running board. I think the EcoBoost molding provides a little more protection as it sticks down further in the front and thus will help stop rocks from being kicked up by the front tires. Plus again, I think it looks nicer. Here are a couple of pictures of Edges that my dealer sold before I ordered mine. You can see the difference. The red Edge is an EcoBoost model and has the trim that I added to my Edge.

Hey everyone. New Edge owner here!! We picked up our Edge on Monday. It had been on order since mid-August. It was a long wait!! So far been loving it! It replaced my 2000 Chevy Blazer LT, which I ordered new back in 99. It had 68,000 miles when I sold it in August. So far I am not missing it. We ordered a 2013 Edge Limited AWD (White Platinum Metallic Tri Coat and the Sienna interior). The switch to the Sienna (chocolate brown) interior was a last minute decision. Sure am glad a made the change. It looks awesome! Our Edge has the 302A package which includes the adaptive cruise. Also ordered it with the towing package and the 20” chrome wheels. Because I liked the rocker panels on the EcoBoost models, I ordered the rocker panels for the EcoBoost and had the dealer replace them. I’ll upload some pictures soon, but need to clean up the Edge first (it’s been raining). Also added the WeatherTech floor mats and cargo liner. Have ordered a bug shield and will put that on to see if I like how it looks. Next, I am going to be doing the complete LED light conversion that Dan Smith from DAYTIME Brightlites offers. I’ve got the pricing, just need to place the order. If anyone lives around Iowa and is thinking of purchasing a new Edge, Union Auto is the place to go! It’s a small Ford dealership where you work directly with the owner. He sold me the Edge at dealer invoice and I got to keep all the rebates. He even brought up the Ford ordering system and showed me all the pricing and information as he placed the order. I’ve never had a dealer do that before. Typically they treat all this information as top secret and they seem to be unwilling to show it to the buyer!! With Union Auto, it was smooth and quick. No arguing/fighting to get your price. And he kept me informed on the status of the order. I knew exactly where the Edge was in the process the whole time. Hope to see you all around the forums. Mike

Hey guys, I just got my 2013 Edge and at first I thought it too was missing the try, then got to looking at it was wedged into the bottom of the console. You might want to double check to make sure it’s not actually there.

I like the molding. Think I will order a set for my Edge. Thanks for posting the pictures!

I ended up ordering the EcoBoost trim pieces for my Limited AWD. Found an EcoBoost model sitting next to a 3.5L V6 model. Liked the rocker panels on the EcoBoost model much better! Cost is about the same as running boards. Thought the running boards would stick out too far, and since the Edge sits lower than most SUV’s, don’t really need them for entering and exiting the vehicle. The EcoBoost trim adds a little bit more protection and dimension to the rocker panels. FYI, got my VIN and window sticker. My dealer tells me my Edge will be built within the week.

That makes sense. So it's not running boards, but different trim around the bottom. I will have to see if I can order that trim to replace what is there.

Hey everyone. I am new to the forum, Ford, and the Edge. Have my 2013 Limited on order with a build date the week of September 24th. Getting excited to get it! Anyway, I am trying to decide on things like running boards/mud flaps, bumper protection, etc. I found a picture of an Edge with running boards, and based on the picture, I really like them. They appear integrated, which is the look that I like. Does anyone know what brand/model running boards these are? Any help would be appreciated. Mike