Sammyaxe

Naaa man I have the entire system going through the REQ. I have an amp on the four polks in the doors as well as the sub so i have all the speakers wired into the unit. Turned out awesome. Although the Smart Engage is set on ac turn on and sensitivity is at about 3/4 and it goes on and off properly. Dont forget about the 1 5second delay.

You need wiring diagrams, they tell you the colors for each speaker wire, i do not have access to them right now or i would send them to you sorry. i would have assumed you had those before starting.

Sorry Akirby, I was just defending myself, wont happen again. Here are some pics Linty, I Still have some finish work to do with neatening the wires and carpeting the wood piece i cut out but so far so good.

The driver side for sure. There is a large rubber grommet, or diaphram seal where a harness run through the bulk head. Its perfect to run the power wire. The speaker wires are all accessible under the LF door sill plate molding. There is a harness that runs back and all the twisted wire pairs for the speaker are right there. Once you wire it all push the power wire and speaker wires under the carpet along the left edge. Dont try to run it under the plastic moldings, they are too bulky. Keep in mind the plastic tabs where the push clips attach are real thin and like to break very easy, so be very careful when removing the plastic panels and door sill. I am referring to a 07 edge with the audiophile.

Hey Linty thanx for responding I just finished my almost complete overhaul of the audiophile system in our edge. All new speakers, sub, 2 amps, sound processor, and a small cap, with the factory head unit. We did not want to lose the completely stock look or in dash 6 disc changer, and messing with steering wheel control adapters is a annoying. It is still tedious work to wire the speaker output wires to the processor, then the amp to the speakers, but at least all four speaker wire twisted pairs are accessible in one spot thats easy to get at. The RE-Q5 is perfect and the system sounds amazing. If anyone would like any pictures, or has any questions let me know. I built a custom amp rack that is fit perfect under the rear floor without having to raise it, and a box that fits behind the rear panel and actually mounts to the factory enclosures cage nuts with 1" L brackets.

so what are you saying? your better than me? you know everything?

Just wondering who loves themselves?

Hey There!! I am in the midst of adding an aftermarket sub to mine and was wondering about the re-q5 processor you installed. Did you just hook it inline just the subwoofer speaker wires, and use it just for the sub, or did you wire in all the speaker in the car to it?