SweetCandyEdge

Yes I was surprised also. Thankfully it was a relatively simple and cheap fix.

The issue was a broken flex pipe.

There is no noise when the transmission is not engaged. There is also no noise when the transmission is engaged but the brake is applied. The noise only appears when the gas pedal is applied and is worse when more gas is applied.

Hi, My wife's 2011 Ford Edge has started to make a sound when applying the gas pedal while driving. Initially I thought it was an exhaust issue however the sound does not exist if the car is not in gear (ie revving does not produce this sound). The sound only happens when in gear and is much more noticeable when starting for a stop. My wife describes this as the 'race car' sound as it is very noticeable in the car. This does not seem like an engine issue. Could it be transmission, PTU, torque convertor or something else? Any help is appreciated. TIA.

Technique worked great. Thank you for the instructions!

Ford SmartLink is coming: https://media.ford.com/content/fordmedia/fna/us/en/news/2017/01/27/ford-vehicle-owners-upgrade-2010-2016-vehicles-with-connectivity-features.html

This is likely the lane departure warning system. You can adjust the vibration intensity or turn the system off if you want. https://owner.ford.com/how-tos/vehicle-features/safety/lane-keeping-system.html

I would not have guessed that but I'm very happy if that's the case. Thank you very much for the informative link.

I have a 2011 Ford Edge Limited (3.5L AWD) that is dripping a yellow (perhaps lime green?) liquid down the center of the car. The drips appear to be originating around the middle of the vehicle. Any ideas or suggestions regarding what this could be? The colour is similar to the windshield washer fluid but I don't understand how it could be leaking mid vehicle unless the hose for the rear wiper sprayer runs down the middle of the car underneath. I've attached a picture for reference. The drips really show up in the snow. TIA.

How does the light in your USB cubby work? For almost a year I didn't realize there was a light in the cubby until I accidently pressed up on the lid while open... Should the light come on automatically when the lid pops open or do you have to push it up to turn the light on everytime?

I had the "paused" message also. The solution for me was to use a new USB stick.

Persistence has finally paid off. I tried one more time and voila... it works!!! I did three things differently: 1. I turned off the steering wheel heater on the main screen in the APIM settings with Forscan. 2. I switched the right IPC to audio instead of nav. 3. I purchased a new USB stick. So I reinstalled v1.1 again (thanks to jmr061) and then installed v2.2 from the new USB stick and everything is fine. After a grand total of about 30 installations everything in finally working.

Thanks so much to jmr061. I was able to reinstall v1.1 and get nav working again. Unfortunately reinstalling v2.2 afterwards ended in the same result with a navigation fault.

FAT32 MBR

No luck. ? I tried a few soft reboots and a couple more master resets this morning. The results are the same with a navigation fault. I checked for DTCs with Forscan and there are none. I am going to try the update one more time and then throw in the towel.